Ultra-Tec Invisiware Swaging Stud For 3/8" Cables - S-12
Details
Ultra-Tec Invisiware Swaging Stud For 3/8" Cables - S-12
The S-12 Invisiware Swaging Stud can be used as a non-tensioning fitting in both level and pitched applications. It is swaged onto the end of a 3/8" cable and threaded into a drilled and tapped hole in the face of the post (1/4" wall thickness minimum). Typically, this fitting is used in collaboration with Invisiware Receivers and stud tensioning fittings on the opposite end, however when using this fitting as a non-tensioning end, you are restricted to use in interior applications only. Additionally, this swaging stud features a threaded surface and comes coated with a baked-on molybdenum-based dry film lubricant in order to prevent the threads from slipping once tension is applied to the cable.
**Invisiware Swaging Studs are most commonly used with Invisiware Receivers. Refer to the chart below for guidelines as to which Invisiware Receiver you should use with your Swaging Stud.
Features:
- For Use With 3/8" Cables
- Thread Size: 9/16-18
- Length: 1.310"
- Diameter After Swaging: 0.500"
| SKU | S-12 |
|---|---|
| Hardware Type | Invisiware Stud |
| Cable Diameter | 3/8" |
| Fitting Type | Non-Tensioning, Swaging |
| Material | Stainless Steel |
| Environmental Impact | Made Of Recycled Materials |
| Country of Manufacture | United States |
| Manufacturer | Ultra-Tec |
