Have a question? Give us a call at (888) 378-1139

Ultra-Tec 471 Series Cable Railing Kit For Metal Posts (Level Runs Only)

Ultra-Tec 471 Series Cable Railing Kit For Metal Posts (Level Runs Only)
Ultra-Tec 471 Series Cable Railing Kit For Metal Posts

* Required Fields



The 471 Series Cable Railing Kit by Ultra-Tec features a surface-mount configuration, along with two different cable size options and a wide variety of lengths that were specifically designed for use with metal posts. It includes a Push-Lock turnbuckle with threaded bolt to easily screw into one end post, and an Adjust-A-Body with threaded bolt for the other end post, making it one of the most simplistic cable railing kits on the market today. With this kit's 100% swageless design specifically made for DIY homeowners, it will completely eliminate the need for expensive professional installation while also making your deck look great!

Swageless fittings are made to be equipped with only the use of hand tools and can easily be installed by hand in the field, unlike traditional cable railings that require the use of a special swaging machine that crimps the fittings onto the cables. Additionally, swageless fittings can be removed and re-used for fixing or replacing the components or posts that the cable run goes through. By using swageless fittings, you eliminate the use of expensive installers and machinery because it can all be done with household tools in a matter of minutes.

Surface-Mount Configurations are the only type of installations that the 471 Series can be used with. Surface-Mount installations create an organized, clean look while also serving as a secure means of installing your cable railing in situations where the back of the post is inaccesible or creating a smooth run of cable on single corner posts.


  • Swageless Design
  • Metal Posts Only
  • Level Runs Only
  • Surface-Mount Configuration
  • Cable Diameters: 1/8" or 3/16"
  • Cable Lengths: 30', 40', 50' and 60'
  • Stainless Steel Grade 316: Indoor/Outdoor Use


  • 1x19 Stainless Steel Cable
  • Push-Lock Turnbuckle With Threaded Bolt
  • Adjust-A-Body With Threaded Bolt

Metal Post Installations

For steel post installation, kits are designed for use with  2-3/8" Sq. tubes. Steel posts will need to have a minimum 1/4" wall in order to handle the hundreds of pounds of tension that is applied once the cables are tensioned. A top rail will also be needed in order to properly distribute the tension. For aluminum post installions, the end posts should be reinforced and it is recommended to use a bottom rail to prevent bowing. Both types of metal posts need to be securely mounted in order to prevent the post from coming loose while tensioning cables.

Intermediate Posts

Intermediate posts (or mid-posts) are to be placed every 48" between end posts. An intermediate post runs from the top rail to the lower mounting surface and is integral for proper structural design. Intermediate posts can be substituted with something thinner such as an aluminum or steel cable brace. Cables are strung through holes in each post in order to provide support between end posts. Each post hole made should not exceed 3" vertical spacing in order to comply with IBC regulations. Cable Braces can be purchased here.

Corner Installations

When taking cable railing through a corner, do not bend the cable past 45° at any time. If turning 90°, a 2-step turn using a double corner post configuration is required, as illustrated. For wood frame cable runs with up to 90° of turn, kits with single tensioners are sufficient. If going through corners totaling more than 90°, you will want to use a kit with tensioners at both ends.

Tools Needed For Installation:

  • 5/32 Drill Bit For 1/8" Cable / 7/32 Drill Bit For 3/16" Cable
  • Cutting Tap Drill Bit I (For Pilot Hole) And 5/16-24 Tap For Threaded Bolt Installation
  • 1/4 Wrench For Installing Threaded Bolts
  • 3/8 Wrench For Tensioning Push-Lock Stud
  • Cable Cutting Tool

Application Guide Installation Guide

*In order to comply with IBC regualtions, an intermediate post must be placed every 48" between posts and distance between each cable shall be no more than 3" clear span (for example if you are using 1/8" cable, you would space them 3-1/8" apart), however specific city and state rules and regulations may apply.


Additional Information

SKU 471
Cable Kit Series 471
Post Type Metal Post
Mount Type Surface Mount
Application Interior/Exterior
Cable Railing Design Swageless
Kit Assembly Components Adjust-A-Body With Threaded Bolt, Push-Lock Turnbuckle With Threaded Bolt
Cable Run Straight (Level)
Cable Material 316 Grade 1x19 Stainless Steel
Installation DIY Friendly
Environmental Impact Made Of Recycled Materials
Country of Manufacture United States
Manufacturer Ultra-Tec

Ultra-Tec 471 Series Cable Railing Kit For Metal Posts (Level Runs Only)